Share: 

DJI Inspire 2 Remote Controller FAQ

DJI Inspire 2 Remote Controller FAQ

What’s the highlight features of the Inspire 2’s remote controller and video transmission system?
The new dual-band Lightbridge HD video transmission system has a maximum transmission distance of 7 km*.
The video feed from the FPV camera and main camera (1080p or 720p) can be viewed simultaneously through the
Picture in View feature. The dual-band system consists of 2.4GHz ISM and 5.8GHz ISM**, giving the Inspire 2 stronger
resistance against interference.
*Unobscured, free of interference, FCC compliant.
**In accordance with local law and regulations, 5.8GHz is not available in some countries.

How long does it take to charge a remote controller? How long does it last on a full charge?
The remote controller is equipped with a 6,000mAh LiPo 2S battery. Fully charging the Inspire 2 remote controller takes approximately 3 hours.
It can be used for approximately 4 hours after being fully charged.

What is the largest tablet that will fit in the remote controller’s mobile device mount?
The mount can support an iPad Air or other similar-sized tablet. Tablets should be no more than 170mm tall.

What kind of working mode does the remote controller support?
Open the DJI GO 4 app, click the remote controller icon and enter to Settings.
You can choose MODE1, MODE2, MODE3, Custom and more under Stick Mode.

Does the Inspire 2 remote controller come with a monitor?
No. The remote controller has a mobile device holder for smartphones and tablets. You can also buy the DJI CrystalSky monitor.

Is there any specific conditions necessary for the Inspire 2 to reach a 7km video transmission range?
The distance here refers to environments free of obstructions and interference, under FCC compliant specifications.

What is the maximum control distance between Master remote controller and Slave remote controller?
The Master and Slave remote controllers can maintain a connection at distances up to 100 meters.

Does the remote controller have a training port?
There is no training port on the Inspire 2 remote controller.

What is the latency of the Inspire 2’s video transmission system?
Below 220ms.

Repair parts replacement: DJI Inspire 2 RC Drone and Spare Parts list


This product was added to our catalog on Tuesday 11 April, 2023.

Copyright © 2024 RC102.com. Powered by RC102