DJI Matrice 300 RTK Payloads FAQ

DJI Matrice 300 RTK Payloads FAQ

Which payloads are compatible with M300 RTK?
Zenmuse H20N, Zenmuse L1, Zenmuse P1, Zenmuse H20/H20T, Zenmuse XT S, Zenmuse XT2, Zenmuse Z30, and third-party payloads developed based on the DJI Payload SDK.
Please download and upgrade to the latest payload firmware from the download page before using the M300 RTK.

How many payloads can be mounted at the same time?
The M300 RTK can be used simultaneously with three payloads: single upward gimbal and dual downward gimbals.

What payload configurations does the M300 RTK support?
The M300 RTK supports the following payload combinations:
Single gimbal: Zenmuse H20N, Zenmuse H20, Zenmuse H20T, Zenmuse L1, Zenmuse P1, Zenmuse XT2, Zenmuse XT S, Zenmuse Z30, or a third-party payload developed based on PSDK
Dual gimbals: Zenmuse XT2 + Zenmuse H20; Zenmuse XT S + Zenmuse H20; Zenmuse XT2 + Zenmuse Z30; Zenmuse XT S + Zenmuse Z30; any single gimbal above combined with a third-party payload developed based on PSDK
Triple gimbals Any dual gimbal combination above + any third-party payload developed based on PSDK
Note: Zenmuse L1 and Zenmuse P1 can only be mounted on a single downward gimbal; Zenmuse XT2 can only be mounted on the location of single downward gimbal No. 1.

Can I control multiple gimbals simultaneously?
You can control the movements of each gimbal simultaneously, but you can't take photos/videos simultaneously.

Can I control the angle of the FPV camera through a remote controller?
No, the angle of the FPV camera cannot be changed.

Does the M300 RTK support the Zenmuse XT, Zenmuse X4S, Zenmuse X5S, or Zenmuse X7?
No.