DJI Mavic 3 Battery FAQ

Does DJI Mavic 3 support fast charging?
DJI Mavic 3 supports USB PD fast charging protocol. PPS protocol can handle up to 88 W of input power, and PD protocol supports up to 65 W of input power.

What should I do if the battery does not respond when I use DJI Mavic 3 for the first time?
New batteries are in hibernation mode and need to be charged to wake up hibernating batteries.
Perform the following to wake up hibernating batteries.
Method 1: Connect the charging cable of the charger to the Type-C port at the rear of the aircraft, and charge the battery until the battery level LEDs light up.
Method 2: Insert the batteries to the Battery Charging Hub, and charge the batteries until the battery level LEDs light up. Please note that the battery charging hub charges batteries in sequence. After a battery is fully charged, the battery charging hub will start charging the second battery to bring it out of hibernation.

What are the functions of DJI Mavic 3 Battery Charging Hub?
DJI Mavic 3 Battery Charging Hub can be used to charge up to three batteries and supports USB PD fast charging protocol. But the Battery Charging Hub cannot be used for battery discharging.

Do I need to power off the DJI Mavic 3 battery before charging it?
Yes, make sure that the battery is turned off before charging. Please note that the battery cannot be charged when it is turned on.

Do you have any suggestions for the maintenance of the DJI Mavic 3 battery?
Before storage, please make sure that the remaining battery level is at least 60%. It is recommended to charge and discharge the battery once every three months to improve battery performance.
If the battery level is below 60%, it is recommended to charge it until it is 60% before storage.
If the battery level is above 70%, the battery will discharge automatically on the 9th day to about 60%.

What is the charging logic of the Mavic 3 Battery Charging Hub ?
The Battery Charging Hub can charge up to three batteries in sequence according to their remaining power level, from high to low.

Does DJI Mavic 3 support battery in-place detection function?
Yes.

How long does it take to fully charge a DJI Mavic 3 battery when using the charger with a normal Type-C cable?
It takes more than 10 hours to fully charge the battery when using a normal Type-C cable to connect the DJI Mavic 3 charger as fast charging is not available. It is recommended to use the fast charging cable to charge the battery first.

How do I update the firmware of the DJI Mavic 3 battery?
The battery's firmware is updated when the aircraft's firmware is updated via the app.
If the battery needs to be updated separately, a warning stating that the battery's firmware needs to be updated will be shown in the app. Tap to update the battery. Or when DJI Assistant 2 is connected, an "Inconsistent Firmware Found" warning will be shown, then tap it to update the battery.

What are the common functions of the DJI Mavic 3 battery power button?
Press once: Check the current battery level.
Press once and then press and hold: Power on or off the battery.
Press and hold for more than four seconds: Link the aircraft with the remote controller.

How can I use the DJI 65W Portable Charger?
The DJI 65W Portable Charger comes with a 65W USB-C cable to charge the Mavic 3 battery. With another USB-A port and a USB-C data cable included in the package, it can also charge the remote controller at the same time. It is recommended to use a standard USB-C cable to charge the Mavic 3 battery.

How long does it take to fully charge a DJI Mavic 3 Intelligent Flight Battery?
Approximately 96 minutes when using the DJI 65W Portable Charger.

Can I use other chargers with USB-C ports to charge the Mavic 3 battery?
Yes. However, to ensure charging efficiency, we still recommend using the DJI 65W Portable Charger. Other chargers at 60W or above supporting PPS/PD protocol are also recommended.

Can I charge Mavic 3 directly through the built-in USB-C port of the aircraft body?
Yes.

Repair parts replacement: DJI Mavic 3 and Spare Parts list