How to install Flytec 2011-5/V900 RC Boat steering gear？
1. Loosen the pull knob and connect the two chains on both sides of the steering gear to the end of the pull rod with a buckle
2. Place the steering gear with the swing rod close to the bow of the ship and inside the top shell
3. Fix the steering gear inside the top shell with four screws
4. Insert the fixed end of the pull rod knob into the top shell
5. Tighten the pull rod to the fixed end
6. Complete the installation of the steering gear, and fix the lever knob with 502/401 glue
7. Complete the installation of the steering gear
This product was added to our catalog on Monday 11 September, 2023.
