This voltage display is used for lithium battery detection in the range of 1S to 8S, automatically detecting the voltage and total voltage of each cell of the lithium battery. It supports reverse connection protection.
It can allow you to understand the working status of your battery anytime and anywhere, so that the battery will not be damaged due to over discharge or overcharging.
Whether in flight or idle state, the electric display can be plugged into the battery balance charging connector to understand the battery level.
Without a multimeter, it's even more essential!
When the voltage drops below the set value, the buzzer will sound and the red LED light will flash; The setting value is 3.3V. Press the button to change the voltage setting value and automatically save the user's current setting value.
Product parameters:
1. Used for 1S-8S lithium battery detection
2. Voltage detection accuracy: ± 0.01V.
3. Display range of group voltage: 0.5V~4.5V
4. Display range of total voltage: 0.5V~36V
5. 1S test mode voltage range: 3.7V~30V
6. Low voltage buzzer alarm mode 2S-8S
7. Alarm voltage setting range: OFF~2.7~3.8V
8. Size: 40mm x 25mm x 11mm
9. Weight: 9g
Usage:
Place the front of the electronic display (one side of the digital display) facing up, with the pin facing you, and insert the white balanced charging plug of the battery along the leftmost pin of the electronic display. The electronic display will immediately sound BB twice, and the screen will display a jumping number. If there is no response, simply reverse the balanced charging plug and plug it in. At the other end of the electronic display, there is a small button used to set the alarm voltage of the electronic display.
This product was added to our catalog on Monday 07 August, 2023.
