HUBSAN ACE SE Standard/Refined version FAQ

▷ How do get the ACE SE Standard Parts?
From RCToy357.com parts can be gotten from there.

▷ How do get the ACE SE Refined Parts?
From RCToy357.com parts can be gotten from there.

▷ HUBSAN ACE SE Standard/Refined version The mobile device and remote control cannot be connected
(1) Check whether the status of the APP control signal icon has changed
(2) For USB Settings on android phones, check out "Android phone connection tutorial"

▷ HUBSAN ACE SE Standard/Refined version Aircraft ID not available.
(1) Restart the drone, remote control and X-HUBSAN 2.0 APP
(2) Update the aircraft firmware
(3) Check whether the LED next to TF card slot of the drone is on in red, if it flashing, means the aircraft function is abnormal

▷ HUBSAN ACE SE Standard/Refined version FPV transmission freezing, gets stuck or easy to disconnect
(1) Adjust the antenna Angle and point vertical side of the antennas to the aircraft, without anything blocking between antennas
(2) Change the flight site, please do not fly near tall buildings, or near signal tower
(3) Update the latest firmware

▷ HUBSAN ACE SE Standard/Refined version Abnormal aircraft hovering
(1) Change the flight site, please do not fly near tall buildings and signal towers
(2) Do the compass calibration and horizontal calibration
(3) Wind is too strong to affect the flight
(4)If the aircraft are indoors, it is recommended to move to the outside for flight

▷ HUBSAN ACE SE Standard/Refined version Aircraft GPS accuracy is not precise or cannot pass the GPS accuracy test
(1) in the open area of the outdoor with GPS over 6 satellite
(2) Walk around near the aircraft
(3) Replace the mobile device

▷ HUBSAN ACE SE Standard/Refined version The battery cannot charge
Re-plug the charger and battery

▷ HUBSAN ACE SE Standard/Refined version short flight times
Battery overcharge or high temperature environment can easily lead to reduction of battery life, it is recommended to keep the remaining 60% or so, full charge again before use

▷ HUBSAN ACE SE Standard/Refined version The tilt Angle of the gimbal is too large or the gimbal show abnormal behavior
(1) Restart the aircraft and re-calibrate the gimbal
(2) Check on the APP to see whether the gimbal status is normal

▷ HUBSAN ACE SE Standard/Refined version Gimbal initialization fails
Before starting the aircraft, take off the protective cover of the gimbal andmake sure nothing blocks gimbal movement.

▷ HUBSAN ACE SE Standard/Refined version The picture is not clear
(1) Check whether the lens protective film is peeled off
(2) Please shooting in a environment with good lighting
(3) Shooting parameters setting in camera Settings of APP
(4) Video source files are saved in TF card files with suffix AA.

▷ HUBSAN ACE SE Standard/Refined version Lens fogging
(1) humid climate causes lens fogginess, change aircraft storage location
(2) Place some desiccant in the protective cover of the gimbal when
storing

▷ HUBSAN ACE SE Standard/Refined version Picture or video is lost
(1) Perform completing recording operation after recording video,otherwise it may lead to video damage or loss
(2) Check whether the TF card is damaged