Buy Hubsan H501S H901A Transmitter/Transmitter battery Link：
Hubsan H501S H901A Transmitter Stick Calibration (Mode 1 And Mode 2 Throttle Settings)
Mode 2: Push both sticks to the upper left corners. Power the transmitter on while holding both sticks in their respective positions; the LCD screen will show "Calibrate Sticks Mode 2". Let go of the sticks, then pull them up, down, towards the center and outwards. Repeat this sequence 3 times, then release both sticks and hold any trim until the transmitter beeps. This indicates a successful calibration.
Mode 1: Push the left stick to the upper left corner and the right stick to the upper right corner. Power the transmitter on while holding both sticks in their respective positions; the LCD screen will show "Calibrate Sticks Mode 2". Let go of the sticks, then pull them up, down, towards the center and outwards. Repeat this sequence 3 times, then release both sticks and hold any trim until the transmitter beeps. This indicates a successful calibration.
This product was added to our catalog on Friday 26 May, 2023.
