Hubsan H501S H906A Transmitter Stick Calibration (Mode 1 and Mode 2 throttle settings)

Transmitter Stick Calibration (Mode 1 and Mode 2 throttle settings)

Mode 1: Push the left stick to the upper left corner and the right stick to the upper right corner. Power the transmitter on while holding both sticks in their respective positions; the LCD screen will show "Calibrate Sticks Mode 2". Let go of the sticks, then pull them up, down, towards the center and outwards. Repeat this sequence 3 times, then release both sticks and hold the "Exit" key until the transmitter beeps. This indicates a successful calibration.

Mode 2: Push both sticks to the upper left corners. Power the transmitter on while holding both sticks in their respective positions; the LCD screen will show "Calibrate Sticks Mode 2". Let go of the sticks, then pull them up, down, towards the center and outwards. Repeat this sequence 3 times, then release both sticks and hold the "Exit" key until the transmitter beeps. This indicates a successful calibration.

• Buy Hubsan H501S Body/Battery/English manual book/Spare Parts Link：
• Hubsan H501S Body
• Hubsan H501S Battery
• Hubsan H501S English manual book
• Hubsan H501S Spare Parts